Does bleach kill black mold?

Black mold is a fungus that may sometimes have a dark green color. If you happen to see molds that are not dark or black in color, they are not black mold. Black mold is also known as the Stachybotrys chartarum.

Basically, this type of mold grows in a moist environment, like the areas inside the bathroom and basements. It usually grows on damp wood, which has enough moisture in it to cultivate mold growth.

 

 Most of the black molds are toxigenic, which means that they release toxins that may lead to respiratory disorders to people especially those with weak immune systems. When molds form colonies with other spores, they produce mycotoxins. With a high concentration of mycotoxins, mold poison may be produced that may be harmful to people.

 

 Black mold does not have any species like poisonous black mold or toxic black mold. However, the most common black mold is Cladosporium that has been observed to have no known toxic side effects except that it could trigger an increase in allergy. In short, black molds may produce symptoms and inimical health effects that are associated with a respiratory disorder, such as coughing and asthma attacks.

At any rate, it is difficult to get rid of black mold and its spores. Since mold spores cannot grow without moisture, it is only right to reduce the moisture in your home to gradually eliminate the molds. Removing black mold using soap and a sponge is not advisable because you will only add moisture to the wood that may culture more black mold later on.

Even the use of bleach will not be effective because black mold may have been rooted deep in the moist wood. In essence, the use of bleach will only kill mold growth on the surface but not at the roots. As a matter of fact, bleach will just contribute to the its growth.

On the other hand, if you need to have your home cleaned up, you need the services of ServiceMaster by Wright. We pioneered and became the trusted source of restoration solutions for homeowners and businesses in Southwest Florida. These services include the cleanup of black mold. We gained our reputation since 1978 and we still strive to provide the utmost services to our clients regarding mold remediation.

For your needs about black mold removal in Port Charlotte Florida, black mold remediation in Port Charlotte, mold removal company in Port Charlotte, and Commercial Mold Remediation Port Charlotte, you may visit our official website to learn more at www.servicemasterrestorations.com/.

For your service requests and questions and other concerns, you may contact us through our telephone number, (866) 676-7761, or visit https://www.servicemasterrestorations.com/ for more details.

We are serving businesses and homeowners all throughout Port Charlotte, Florida, and its surrounding areas and counties.

Our dedicated and courteous coordinators await your call so that we can provide the utmost support for your complete satisfaction.

How do you keep mold from coming back?

Have you ever asked yourself how and why are you seeing a dark spot in your wall that you recalled removing before? Has it come back again?

Molds are fungi that can be found practically anywhere in any environment. They thrive and multiply by spreading spores. Molds can and will come back in the same spot when the condition permits it. They are microscopic and often thrive in places we could not see and reach.

 

Preventive measures, like using mold-resistant paint, must be taken to eliminate the presence of mold. You should remove mold the instant you see or smell it. Watch out for warning signs like a musty odor, black spots or discoloration, or water stains.

 

Even if you use bleach or other cleaning products, mold will grow again when you don’t do the following to prevent it from coming back:

 

First, reduce the moisture level. Damp places are the most conducive places to mold survival and proliferation. A damp basement, leaky roof or plumbing, humidifiers, poorly ventilated rooms and/or wet clothes, and incidents of flooding are the most common sources of moisture. However, moisture buildup can be prevented by fixing leaky roofs, windows, walls, pipes, and faucets; letting fabrics dry properly (drying them outdoors is ideal); using a dehumidifier; maintaining good ventilation, especially in the kitchen, laundry areas, and bathrooms; and drying flooded or wet areas within one to two days.

 

Second, use the proper cleaner. Check your local cleaning supply store for cleaners designed to kill mold spores. There are even natural cleaners that are not harmful to your health. Spray the area carefully and thoroughly.

 

Third, get rid of objects that cannot be dried out. While some objects may be cleaned from mold, other objects like wood pose a challenge in removing mold. When these objects will possibly promote the growth of mold in your home, throw them out because mold will still thrive on them.

 

Lastly, call in the professionals. Mold must be removed as soon as possible. When you have already tried the above-listed remedies but still see mold coming back, it is time to have experts do it for you. Professional help is still better than doing it yourself because the problem might worsen if you don't know how to perform remediation properly. Getting mold out thoroughly and making sure it doesn’t come back is a job for the professionals of ServiceMaster by Wright.

ServiceMaster by Wright is equipped with the tools, training, and expertise to locate and remove mold, even black mold. Our mold remediation specialists will inspect the area, detect the presence of mold, repair the damage and thoroughly clean the affected surface. We even have 24/7 Emergency Services available with a fast response time. Our mold removal services use top-of-the-line products, updated knowledge, and excellent skills to guarantee the best results for your home. It will all be for an affordable cost.

For questions on mold removal in Sarasota Florida, mold remediation in Sarasota, mold removal company in Sarasota, or Commercial Mold Remediation Sarasota County, contact ServiceMaster by Wright at (866) 676-7761. We are serving businesses and homeowners all throughout Sarasota County, Florida, and its surrounding areas and counties.

For more details, please check us out at http://bit.ly/ServiceMasterbyWright.

How do You Prevent Black Mold?

Mold spores from the outside, plus wet organic material on the inside, equals mold growth. If you do the math, all you have to do is take one out of the equation to prevent black mold. This is easier said than done. From your drywall to your basement and everything in between, the inside of your house is a black mold infestation waiting to happen.   

There are so many ways the inside of your house could get wet or mold spores from the outside could get in. You must be vigilant in looking for the signs of mold growth to be able to make a timely call to a professional like ServiceMaster by Wright, an excellent and reputable mold removal company in Punta Gorda.

An even better approach is being proactive about the potential breeding grounds of mold and nipping black mold infestation in the bud. Here are some ways for you to do it:

Control moisture

1. Regularly check for pipe leaks, burst pipes, or any other potential source of errant water that could cause moisture inside your house. This includes regular inspection of gutters and drainpipes that help keep water out during rain.

2. Keep moisture out through proper ventilation. Invest in exhaust fans or open your windows to improve airflow, especially in areas prone to getting wet like your laundry room, bathroom, and kitchen.

3. It only takes 24 to 48 hours for mold to start growing, so if things do get wet, dry them immediately. This is true even for clothes and towels. Hang them outside or in a room with proper ventilation instead of just leaving them lying around.

4. Keep the humidity inside your house below 60%. Use dehumidifiers or air conditioners and familiarize yourself with the local weather if needed.

Minimize mold spores

1. Mold spores can stick to your clothes and shoes until you get home. Pets can bring them inside with their fur. They can even float in through open windows, given the right wind condition. The bottom line is, mold spores can get inside your house whether you like it or not. Dust and vacuum regularly to remove mold spores that have settled inside your house.

2. Use air purifiers to remove airborne mold spores. The ones with HEPA filter are most effective, able to remove 99% of air pollutants.

Mold spores are everywhere and are a natural part of the environment, and sometimes, despite your best efforts, they still manage to get into the nooks and crannies of your house. It is in these hidden parts of your house that mold usually starts to grow unchecked and out of sight.

The best thing you can do is to watch out for early signs of mold growth, like discoloration on walls or a musty odor. The minute you see one, call ServiceMaster by Wright. As experts in black mold remediation in Punta Gorda, we can help you identify the root cause of problematic mold growth and deal with it before it gets worse.

If you are tempted to remove it yourself, don’t. Remember that what you see on the surface is usually just the tip of the iceberg. ServiceMaster by Wright has years of experience in black mold removal in Punta Gorda and can do it for you safely and effectively.

We also offer commercial mold remediation in Punta Gorda that business owners can depend on. Call us at (866) 676-7761 or visit our website at https://www.servicemasterrestorations.com for more details.

Top 6 Risky Types of Molds possible in your Home in Southwest Florida

Our homes are supposed to be places of comfort and safety; however, if they are not kept clean and well-maintained regularly, molds can creep in and cause harm to our health and property. 

Molds grow in moist, warm and dark places. Mold remediation in Port Charlotte, Florida is available to help you eradicate molds that threaten your health. When any member of your household is suffering from chronic allergy, respiratory illnesses and other internal diseases, beware because it can be caused by mold.

Six of the most common molds that can easily grow within our personal spaces are Acremonium, Cladosporium, Trichoderma, Aspergillus, Aureobasidium, and Alternaria.

Acremonium, the fine powdery substance

Acremonium is considered a toxigenic mold. It changes its appearance over time, from a tiny moist mold into a powdery substance. It can come in different colors: white, grey, pink or orange. Acremonium can commonly be found in window sealants, cooling coils, humidifiers, and drain pans. Aside from causing an unpleasant sight in a home, exposure to this kind of mold can cause serious diseases that affect the immune system, bone marrow and other internal organs. Acremonium is carcinogenic and may affect the human brain. Before any of its roots can penetrate your abode, prevent it by checking with mold removal in Port Charlotte.

Cladosporium, the suede-like intruders

Cladosporium is another mold that you should avoid. It is an allergenic mold type that grows both in warm and cold settings. It commonly thrives in carpets, fabrics, and upholsteries, as well as inside cupboards and under floorboards. You can easily identify it because of its brown or olive-green suede-like appearance. Before you suffer from its dangerous effects, contact your mold remediation company in Port Charlotte. Diseases associated with this type of mold are: allergic reactions to the nose, eyes, skin and throat. Severe effects are lesions, skin rash, sinusitis, asthma, and lung infections.

Trichoderma, the wooly-textured clusters

Trichoderma is an allergenic mold that is white-colored with green patches. Its common habitat are wet areas such as carpets, wallpaper, and other damp fabric. It grows in colonies with wooly textures at the beginning and later on becomes compact. Trichoderma can also be found in air conditioning filters. It has been linked to pulmonary and hepatic conditions, although some molds of its class are considered non-pathogenic. This mold is very destructive to building materials because it contains an enzyme that destroys paper, textile and wood; hence, Trichoderma infestation may result in the crumbling of building walls and structures.

Aspergillus, a common indoor and outdoor mold

Aspergillus, a common mold sprouting around certain properties, can actually cause severe reactions. Some of its adverse effects are respiratory infections, allergic reactions, and inflamed lungs. In case this mold type is not eradicated in your home, a dangerous condition can develop.

Aureobasidium, the colorful fungus

Typically found on wooden furniture, all surfaces, painted walls, and wallpaper, Aureobasidium can be easily noticed because of its black and pink color.   According to studies, this type of mold is the worst type of household nuisance since it affects homeowners by intensive allergic reactions.

Alternaria, the common allergen

Usually found in the sink, shower, and dark areas at home, the Alternaria mold threatens homeowners with asthma attacks and allergic reactions. This type of mold is commonly found both indoors and outdoors, so it must be eliminated immediately if not prevented.

Regular cleaning and check-up is best done by ServiceMaster by Wright. Our services are available in Bonita Springs, Bradenton, Cape Coral, Englewood, Fort Myers, Longboat Key, Naples, Marco Island, Sarasota, Siesta Key, and Venice, Florida. Don’t hesitate to call 866-676-7761. We are open from 8:00 AM to 5:00 PM, but you can always get our services 24/7 through our emergency response team. For more details about our services, visit our website at https://www.servicemasterrestorations.com/.